The EPEVER Tracer AN Collection Photo voltaic Demand Controller is often a highly effective solar controller designed for off-grid photo voltaic units. Determined by multiphase synchronous rectification technological know-how, it assures optimized Electricity conversion and procedure steadiness for a wide range of photovoltaic (PV) applications.
Important Functions in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller technological innovation for remarkable photo voltaic Electrical power harvesting. Vital functions consist of:
Multiphase Synchronous Rectification (MSR) for enhanced Vitality conversion.
Superior MPPT Algorithm with >ninety nine% performance.
Dual-Phase Charging for enhanced battery existence.
Liquid crystal display Exhibit with authentic-time knowledge checking.
A number of Load Handle Modes like guide and timer.
Extensive Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Step-by-Step Guide to Setting Up the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Make certain all elements are integrated: Tracer AN unit, temperature sensor, interaction cables, and consumer guide.
Verify the model selection and voltage scores match your photo voltaic panel and battery requirements.
two. Mounting the Demand Controller
Choose a perfectly-ventilated, dry locale near to the battery bank.
Protected the Tracer AN controller utilizing the offered mounting brackets.
Retain right clearance for heat dissipation.
3. Wiring the Photo voltaic Demand Controller
Caution: Usually adhere to proper protection protocols and ensure the method is powered off right before connecting parts.
Phase 1: Link the battery terminals to the demand controller (beneficial to optimistic, unfavorable to negative).
Action 2: Connect the photo voltaic panel array for the PV input terminals.
Move three: Link the load terminals if using a direct load relationship.
Phase 4: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Settings
Electricity on the controller by visit here connecting the battery to start with.
Make use of the LCD Display screen to navigate the options menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, light Regulate.
5. Monitoring and Info Logging
The Tracer AN Series supports serious-time checking using the MT50 distant meter.
Information is usually logged by means of the RS485 communication port applying software package including Photo voltaic Station Personal computer.
Distant monitoring can be done Together with the EPEVER WiFi module.
6. Troubleshooting Widespread Troubles
Problem one: No Electric power Output
Verify battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Challenge two: About-Voltage Security
Validate the photo voltaic array’s voltage ranking.
Adjust technique parameters if required.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT settings during the menu.
Benefits of the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification technological innovation ensures:
Increased Performance: Lowered Electrical power losses in the course of conversion.
Increased Reliability: Steady performance beneath variable hundreds.
Lengthier Battery Lifestyle: Dependable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation is an Excellent option for optimizing solar energy generation and lengthening battery life. By subsequent the above setup manual, customers can guarantee most efficiency and technique longevity.